Software Information CDJ-3000

The CDJ-3000 is a rekordbox Hardware Unlock device. So, to use Performance mode, all you need to do is to update to the latest version of the software even if you're using the Free subscription plan.

rekordbox software is available from the below website.
https://rekordbox.com

List of MIDI Messages

CDJ-3000 works with MIDI-compatible software, by assigning MIDI message.

Please refer to the list of MIDI message to find mapping values of all buttons and knobs. To assign MIDI message to all software function, please refer to your manufacturers' software manual.

Please do not run multiple DJ Software on your computer at the same time. When switching from one DJ software to use another, please turn the CDJ-3000 power off and then power back on after software switch has been completed.

For further details of the usage, please refer to the software manufacturers.

For all information about Serato DJ Pro, please visit serato.com.

This section describes necessary information when you use your CDJ-3000 with Serato DJ Pro.

CDJ-3000 has a computer control mode.
That mode enables the CDJ-3000 to control Serato DJ Pro by connecting your computer with a USB cable.

The internal USB sound card does not work as Serato DJ Pro's audio output device.
You need to use an audio output device comes with Serato DJ Pro or a mixer that equips an audio output device for Serato DJ Pro.
serato.com

USING THE CDJ AS A Serato DJ Pro CONTROLLER

You can control Serato DJ Pro from the CDJ-3000.

How to setup (Sep, 2021)

• Operating Instructions (Windows / macOS)
  Connection Guide
  This is instructions regarding to connection and setting of Serato DJ Pro.
• Serato DJ Pro (Windows / macOS) : ver. 2.5.7
• Driver software (Windows / macOS)
  It isn't necessary to install the driver software.
  By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.
• CDJ-3000 Firmware (Windows / macOS) : ver. 1.20 or later

For all information about djay PRO AI, please visit algoriddim.com.

This section describes necessary information when you use your CDJ-3000 with djay PRO AI.
CDJ-3000 has a computer control mode.
That mode enables the CDJ-3000 to control djay PRO AI by connecting your computer with a USB cable.
The CDJ-3000 equips an internal USB sound card. So you can use this sound card as an audio output device for djay PRO AI.

Using the CDJ as a djay PRO AI Controller

You can control djay PRO AI from the CDJ-3000.

How to setup (May, 2021)

• Operating Instructions (macOS)
  Connection Guide
  This is instructions regarding to connection and setting of djay PRO AI.
• djay PRO AI (macOS) : ver. 3.1.2
• Driver software (macOS)
  It isn't necessary to install the driver software.
  By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable
• CDJ-3000 Firmware : ver. 1.09 or later

Using the CDJ AS djay PRO AI Audio Output Devices

You can use the CDJ-3000's internal audio sound card as an audio output device for djay PRO AI.

How to setup (May, 2021)

• Operating Instructions (macOS)
  Connection Guide
  This is instructions regarding to connection and setting of djay PRO AI software.
• djay PRO AI (macOS) : ver 3.1.2
• Driver software (macOS) : It isn't necessary to install the driver software. 
  By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.
• CDJ-3000 Firmware : ver. 1.09 or later

For all information about TRAKTOR PRO 3, please visit www.native-instruments.com.

For all information about TRAKTOR Series, please visit www.native-instruments.com. 
This section describes necessary information when you use your CDJ-3000 with TRAKTOR Series. The CDJ-3000 equips a computer control mode.
That mode enables the CDJ-3000 to control TRAKTOR Series by connecting your computer with a USB cable.
The CDJ-3000 equips an internal USB sound card. So you can use this sound card as an audio output device for TRAKTOR Series.

Using the CDJ as a TRAKTOR PRO 3 Controller

How to setup (June, 2021)

• Operating Instructions (Windows / macOS)
  Connection Guide
  This is instructions regarding to connection and setting of TRAKTOR Series software.
• TRAKTOR PRO 3 (Windows / macOS)
  TRAKTOR PRO 3 ver.3.5.0
• Driver software (Windows / macOS)
  t isn't necessary to install the driver software. 
  By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.
• CDJ-3000 Firmware (Windows / macOS)
  ver.1.11 or later

Using the CDJ as TRAKTOR PRO 3 Audio Output Devices

Pioneer DJ provides driver software for TRAKTOR Series.
With this file, you can use the CDJ-3000's internal audio sound card as an audio output device for TRAKTOR Series.

How to setup (June, 2021)

• Operating Instructions (Windows / macOS)
  Connection Guide
  This is instructions regarding to connection and setting of TRAKTOR Series software.
• TRAKTOR PRO 3 (Windows / macOS)
  TRAKTOR PRO 3 ver.3.5.0
• Driver software
  Windows
  ver.1.60 or later
  
  macOS
  It isn't necessary to install the driver software.
  By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.
  
  
• CDJ-3000 Firmware (Windows / macOS)
  ver.1.11 or later